Download
The bolts provided with your kit are fora STOCK version of your motorcycle. If your motorcycle has aftermarket saddlebags, backrests, etc it maybe necessary to acquire alternate bolts to accommodate your aftermarket accessories.
1. Place motorcycle on a smooth level surface on its side stand.
2. Install leveling screw jacks so that motorcycle is in an upright and level position.
3. Remove saddlebags.
4. Mount bracket A ( left side ) to the 3 bolts that attach the rear fender and sub frame to the main motorcycle frame. new bolts provided
5. Mount bracket B ( right side ) to the 3 bolts that attach the rear fender and sub frame to the main motorcycle frame. new bolts provided
6. Bracket C mounts to the outside of bracket A at the rear lower hole. ( left )
7. Bracket D mounts to the outside of bracket B at the rear lower hole. ( right )
8. Bracket E ( left ) attaches to the outside of the motorcycle frame just under the rear foot peg and above the frame weld with the provided U-bolt. see diagram
9. Bracket F ( right ) attaches to the outside of the motorcycle frame just under the rear foot peg and above the frame weld with the provided U-bolt. see diagram
10. Bolt brackets C and D to the top rear of the receiver hitch.
11. Bolt brackets E and F to the top of the forward arms of the receiver hitch.
12. Tighten all bolts at this time.
13. Remount saddlebags and check all bolts for tightness.
Friendly Link
Categories
Archives
